Installation Manuals
Download comprehensive guides and documentation for your DrainPro System installation.
Manual Preview
Preview not loading? Open the PDF in a new tab.
Product Overview
The DrainPro System is an automated, in-line pump designed to prevent and eliminate clogs in A/C condensation drain lines. The in-line pump design creates strong suction and discharge pressure, ensuring condensation flows freely through the drain line.
- • Pre-programmed Timer: Runs for 2 minutes once a week, every Saturday from 1:00 PM to 1:02 PM (EST)
- • Water Level Sensor: Automatically activates when drain pan water level rises, removing obstructions
- • Installation: For residential and commercial use in 3/4 inch PVC gravity-fed condensation drain lines
Safety Information
Warnings
- Intended Use: Device for suctioning and discharging condensation drain lines only. Do not use outside intended scope.
- Installation: Do not plug in until installation instructions are read and understood.
- Component Safety: Never operate with missing or malfunctioning components.
- Interior Only: For interior air handlers only (attics, utility rooms, garages). Not for exterior air handlers.
- Exclusivity: Do not use in conjunction with other pumps or drain line clearing products.
- Maintenance: Always unplug when servicing.
Cautions
- Keep hair, jewelry, and loose clothing away from moving components.
- Keep children away—not a toy. Choking hazard with packaging materials.
- Adhere to state/local laws and ordinances.
- Do NOT connect to power until installation is complete.
- Loss of electricity requires timer re-verification and reprogramming if necessary.
Product Features & Contents
Included Components
- 1. Control Box
- 2. Digital Timer
- 3. Mounting Brackets
- 4. Motorized Ball Valve
- 5. Water Level Sensor
- 6. Flex Hose (×2)
- 7. 3/4" PVC Fittings (Elbows, Tees, Unions, Male Adapter)
- 8. 3/4" End Cap Flapper
- 9. Hardware & Power Cord
Tools/Materials Needed
- • PVC Pipe Cutter/Saw
- • Pencil & Tape Measure
- • PVC Primer and Cement
- • Teflon Tape
- • Flat Head Screwdriver
- • Phillips Head Screwdriver
- • 5/16" Hex Drive
- • Power Drill
Installation Steps
Power Off A/C Unit
Switch thermostat to OFF to disable cooling.
Locate A/C Components
Find air handler and condensate drain line connected to drain pan.
Determine Installation Orientation
Choose location and orientation for motorized ball valve. Dry fit components to confirm clearance.
Replace Male Adapter (if needed)
Apply Teflon tape and hand-tighten adapter with wrench.
Measure & Mark Drain Line
Mark drain line section allowing 3/4" for insertion into fittings.
Cut Drain Line
Use pipe cutter or hacksaw. Dry fit new orientation to confirm fit.
Install Motorized Valve & Fittings
Glue all pieces using PVC primer and cement. Allow time to cure.
Mount Control Box
Secure with 1/2" self-tapping screws to air handler or wall.
Install Water Level Sensor
Snap onto secondary drain line (side of pipe). Install on primary line if secondary unavailable.
Connect Flex Hoses
Connect inlet hose from air handler side, outlet hose downstream of valve. Use PVC cement.
Install End Cap Flapper
Mount horizontally at drain line outlet to prevent insect entry.
Power Control Box
Plug in unit. Verify digital timer displays correct date/time.
Program Digital Timer
Timer pre-set to run Saturdays at 1:00 PM EST. Adjust as needed (scan QR code for timer instructions).
Final Check
Turn A/C back on. Check for leaks. Test system manually via timer button.
Limited Warranty (3 Years)
Warranty Period: Begins on date of purchase. A/C Product Solutions LLC will replace or repair defective units.
Warranty is Void When: Problems result from abuse, misuse, electrical issues, or failure to follow instructions. Serial number altered or removed. Damage from negligence or tampering.
Not Liable For: Testing, installation, removal costs, normal wear and tear, or tools/supplies needed for repairs.
Claims: Contact customer service with proof of purchase. Buyer pays return shipping to A/C Product Solutions LLC. Company pays return shipping to buyer (international excluded).
Questions or Support?
Our customer service team is ready to help with installation, operation, or warranty questions.
Phone: 1 (800) 463-1406
Email: info@steadystreamac.com
Website: www.steadystreamac.com